saltyfishboy
11-02-2002, 09:25 PM
New Lighting for 29 gallon tank. I have once again upgraded my lighting. I bought a 2*55 Watt Bright Kit from AHSupply.com. I made my own housing for it and it turned out great. email me if you have questions, saltyfishboy@hotmail.com
Here is what I did. I used poplar wood to make the housing. I built it to fit on top of the tank and not hang over. Below are pictures of the housing after construction.
http://www.fishhelpcentral.com/nuke/P1010007.jpghttp://www.fishhelpcentral.com/nuke/P1010008.jpg
http://www.fishhelpcentral.com/nuke/P1010009.jpg
Next I applied a water sealer/stain to avoid warping issues in the future.
http://www.fishhelpcentral.com/nuke/P1010010.jpghttp://www.fishhelpcentral.com/nuke/P1010011.jpg
http://www.fishhelpcentral.com/nuke/P1010013.jpg
Then I installed the lights. I thought all the wiring would be tricky but it was diagrammed very well...making it very easy.
http://www.fishhelpcentral.com/nuke/P1010012.jpg
http://www.fishhelpcentral.com/nuke/P1010015.JPG
The finished
Product!!
Here is what I did. I used poplar wood to make the housing. I built it to fit on top of the tank and not hang over. Below are pictures of the housing after construction.
http://www.fishhelpcentral.com/nuke/P1010007.jpghttp://www.fishhelpcentral.com/nuke/P1010008.jpg
http://www.fishhelpcentral.com/nuke/P1010009.jpg
Next I applied a water sealer/stain to avoid warping issues in the future.
http://www.fishhelpcentral.com/nuke/P1010010.jpghttp://www.fishhelpcentral.com/nuke/P1010011.jpg
http://www.fishhelpcentral.com/nuke/P1010013.jpg
Then I installed the lights. I thought all the wiring would be tricky but it was diagrammed very well...making it very easy.
http://www.fishhelpcentral.com/nuke/P1010012.jpg
http://www.fishhelpcentral.com/nuke/P1010015.JPG
The finished
Product!!